The webbing simply goes over the head, through the bit and attaches to the saddle dees on either side of the saddle with a trigger clip, they also have an adjustment slider to aid achieving the desired sizing.
There are 2 sizes available:
SMALL = 137-251cm (54-99″) – Mini to Cob
LARGE = 230-435cm (90-171″) – Cob to Extra Full
The small are 16mm wide.
The large are 19mm wide.
If you require one of our other colours please advise and we can have them made for you.
We also manufacture ‘Daisy Reins’ which do a similar job but attach to the back of the bridle.
Please check our other listings if you would prefer this type of rein.
Endurance Combination Bridle
The Endurance bridle is made in 19mm (3/4″) soft webbing that converts to a controller head collar by simply removing the cheek pieces with the spring clips. (Trigger clips can be supplied by special order). Buckle fitting to bit for easy removal. Ideal for endurance/long distance riding or for introducing youngsters to the bit.
Noseband can be purchased individually, please see ‘endurance combination noseband only’ under bridle parts.
Noseband circle 56cm – Bit-to-Bit size 70-92cm
Noseband circle 59cm – Bit-to-Bit size 74-96cm
Noseband circle 64cm – Bit-to-Bit size 86-108cm
Noseband circle 70cm – Bit-to-Bit size 102-124cm
Noseband circle 78cm – Bit-to-Bit size 118-140cm
NOTE: This product is not suitable for a flash noseband
NOTE: Matching reins are sold seperately (see Reins & Girths)
Slip Head with Buckle
This item can be used as a headpiece for a chifney or other bit, alternatively it can be added to our standard bridle to provide an ‘exercise’ double bridle. Made in our 16mm soft web.
Sizing Guide is as follows:
80-91cm = PONY
91-102cm = COB
102-113cm = FULL
113-124cm = XFULL
A useful addition to any tack room.
They are available with buckle-to-bit fastening as standard but can also be requested with Trigger Clip attachments instead.
Combination – For use on Libbys Exmoor & Endurance Bridles (PAIR)
We now offer 2 options of Combination Cheek Pieces which will clip onto your Combination bridle in a similar way to each other.
The Baby Snaps are more popular due to their lightweight but are slightly more awkward to remove, especially with gloves on or in the cold. However the Trigger option is very usefull if you need to remove them quickly and don’t mind the additional weight.
13-15½cm – Pony
15-17½cm – Cob
19½-22cm – Full
22½-25cm – Extra Full
*Sizes listed are approximate and can vary slightly
The Trigger options will be slightly longer due to the extra length compared to the Snaps.
A popular girth for the little ones.
This girth is 3″ wide (75mm) padded web. It has 4 strong girth buckles so it will fit onto all standard saddles with Elastic keepers for you to tuck the excess girth straps inside.
From 10″ to 22″ Long in 2″ Steps
No more struggles, You have finally found the solution to your miniature saddle fitting problem.
For an additional £4 a flash noseband is available on this product. (As pictured).
The Exmoor Bridle is a combination bridle and head collar, available with an additional flash attachment if required. Just by simply removing the cheeks with trigger clips, a headcollar remains.
Nose Circle : 52-61cm & Bit-toBit Size : 70-92cm
Nose Circle : 52-61cm & Bit-toBit Size : 74-96cm
Nose Circle : 57-66cm & Bit-toBit Size : 86-108cm
Nose Circle : 62-71cm & Bit-toBit Size : 102-124cm
Nose Circle : 66-75cm & Bit-toBit Size : 118-140cm
NOTE: Matching reins are available seperately (see Reins & Girths)
An adjustable Hackamore supplied complete with IRONS, the front has a fleece lining for comfort with a webbing strap for the back.
It is supplied with a Libbys standard half bridle and the appropriate length cheek pieces for each size requirement.
NOTE: Reins are sold seperately (see Reins & Girths).
The hackamore nose unit can be purchased separately, please see “bridle part” page.